DreamDeck Installation
The Dream™Deck and Dream™Railing System is designed to attach over wood framing. The vinyl decking and railing is easy to cut using a fine-tooth paneling blade in a circular saw, mitre saw or table saw. The aluminum I-Beam in the railing easily slides out and should be cut with a metal blade (hacksaw or reciprocating saw). No special tools are needed. If you can build a wood deck, you can easily build a Dream™Deck!

The innovative snap-track design makes Dream™Deck an installer's dream. The snap-track installation strip is secured to wooden joists with decking screws (spans should be 16" on center). The deck planks snap onto the tracks, leaving no visible fasteners. The plank ends are then finished off with a vinyl end cap. It's that simple! Installation is simple with our unique spacer tool. The tool increases your productivity on the job by taking the guesswork out of spacing the deck planks. You have the flexibility to adjust the spacing between planks to minimize cutting. The railing installation is intuitive and quick. Vinyl post sleeves are slid over your pre-mounted 4" x 4" posts. The railings slip into the pre-punched post sleeves and fasten to the posts. The pickets install quickly (with no fasteners) using the picket spacer caps snapped onto the rails.